A Globe Valve is a form of pipeline valve with a movable plug or disc and a fixed ring seat contained in a generally spherical body. Globe valves are widely used in industrial plants.
Globe valves come in two forms: manually and automatically operated. Globe valves can be utilized to regulate flow, pressure, or completely stop the flow. globe Valves may be useful in a variety of settings, including those where flow needs to be controlled but not at a constant rate.
When it comes to changing the flow, globe valves are your best bet. The following are some examples of how globe valves might be used:
- Fuel oil systems
- Cooling water systems
See All Globe Valve Manufacturers
Consider the application for which you will need a globe valve when purchasing the right one for your company. When you want to regulate the flow of a low-temperature and low-pressure system, you should use a globe valve designed to have pressure flowing under the seat. Those needing a valve that can withstand more severe conditions should choose one that allows pressure to pass above the disc. List of Globe Valve for Sale
Control Valves react to a controller's signal by expanding or reducing the flow passage. As a consequence, the flow rate may be directly controlled and pressure, temperature, and liquid level can all be influenced as well. Control valves are components of Industrial Equipment that regulate fluid flow using a set point.
The typical maximum flow rate for a control valve is between 20 and 80 percent open, with no less than 20% open at minimum flow rates.
Choosing the correct control valve for a process requires assessing a number of factors, including flow characteristic, size, noise, cavitation potential, valve body and trim materials, actuator size and type, and dynamic response to any changes in the control signal. In general, the selection is determined by pressure and temperature conditions as well as application. List of Control Valve for Sale
In order to do the calibration, you must first provide 4 milliamperes (mA) for zero correction. You may adjust the span by providing 20 mA using the flapper. Check to see whether it's zero after you've finished adjusting the span. If required, repeat the procedure. View all Control Valve Manufacturer
- ۰۱/۰۲/۰۷